Hardy Process Solutions C Series, Operation And Installation Manual, Page: 21 / 92

Chapter 3 - Installation
3-1
CHAPTER 3 - INSTALLATION
A Brief Description of
Chapter 3 All information contained in Chapter 3 pertains to
unpacking, cabling, interconnecting, configuration
and installing the HI 1746-WS Weigh Scale Module.
Alternatives to any procedures contained or implied
in this chapter are not recommended. It is very impor-
tant that the user and service personnel be familiar
with the procedures contained in this chapter, before
installing or operating the HI 1746-WS module.
Hardy Process Solutions appreciates your business.
Should you experience any problems installing this
equipment, contact Hardy Customer Support for
assistance.
Unpacking Step 1. Before signing the packing slip, inspect
the packing for damage of any kind.
Step 2. Report any damage to the carrier company
immediately.
Step 3. Check to see that everything in the pack-
age matches the bill of lading. You should
normally have:
• HI 1746-WS Weigh Scale Mod-
ule
• Operation and Installation Man-
ual
Step 4. Write down the Model and Serial number
of the module. Store this information in a
convenient location for reference when
contacting The Customer Support Depart-
ment for parts or service.
Installing the
HI 1746-WS into an
Allen-Bradley SLC 500
Processor or Allen-
Bradley Remote Rack
WARNING ELECTROSTATIC DISCHARGE MAY DAM-
AGE SEMICONDUCTOR COMPONENTS IN
THE MODULE. DO NOT TOUCH THE CON-
NECTOR PINS. PLEASE OBSERVE THE FOL-
LOWING HANDLING PRECAUTIONS: