Hardy Barth cPP2, Installation And Operating Manual, Page: 31 / 35

Technical data
Product cPP2
Type 2T22 2T44 4T44
Connection terminals Terminal block, max. 5 x 50 mm 2 (L1,L2,L3,N,PE)
Rated voltage / frequency 230 / 400 V 3-phase; 50 Hz
Rated current 32 A 63 A
Power supply 22 kW 44 kW 44 kW
Charging power max. 1x 22 kW / 2x 11 kW 2x 22 kW 2x 22 kW / 4x 11kW
Charging socket / cable
(automatic socket release in case of
mains voltage failure)
2x Type 2 32A, acc. IEC 62196-2
4x Type 2 32 A,
acc. IEC 62196-2
RCD / circuit breaker RCBO Type A C32 10,03, per charging point
DC residual current detection electronic, DC-RCM, I
Δn,DC
≥6 mA, per charging point
Welding Detection Error signal via LED indicators
Lightning and overvoltage
protection
Type 1 + Type 2 combined
Energy meter MID-compliant, per charging point
Authentication RFID Mifare DESFire, (ISB) and LEGIC Prime & Advant
Charge release Free charging, local RFID, Whitelist, OCPP 1.6 (optional
Communication 10/100 Mbit Ethernet and mobile radio (2G,3G,4G)
Load management
Dynamically between charging points
Vehicle communication IEC 61851-1 „Mode 3“ and ISO 15118 Ready
Operating temperature -25 to 50° C
Storage temperature -25 to 85° C
Relative humidity 5 bis 95%, no condensation
Class of protection I
Overvoltage category III
Degree of pollution 3
Degree of protection IP44 (housing)
Maximum Elevation ≤ 2000 m AMSL
Pillar dimensions [mm] 1.441 x 440 x 203 (H x B x T)
Weight of charging pole ca. 47 kg ca. 55 kg
Item number 3M1 XXXXX
Installation and operating manual cPP2 charging pole
Version: 1.0.2
31