The type 2 charging sockets of the cPP2 are each internally equipped with a DC residual
current module.
This protection is a prerequisite especially if your electric vehicle itself does not provide
protection against DC fault current: Information on this can be found in the manual for
your vehicle and from the manufacturer or Sales partner for your vehicle.
Charging process
The cPP2 is designed to charge your vehicle as quickly as possible. However, the effective
charging time depends on the vehicle battery, as well as the current residual energy in
the vehicle. A binding statement on the charging time is therefore not possible:
You can therefore only conclude the actual charging time yourself from your practical
experience values.
Should a malfunction occur during the charging process or afterwards, this will be
indicated via the LED status indicators of the cPP2. The chapter Status LED, page 29,
describes how to recognize operating and error states and what measures are necessary.
Installation and operating manual
cPP2
charging pole
Version: 1.0.2
25