STEP 1 - Measure and mark for installation
NOTE: Illustrations for measurement only. Installation of brackets and mounts will begin in Step 2
Bottom measurements
Cabinet Rail Bracket Measurements
15”
A
B
15”
A
B
15”
3-29/32”
4-21/32”
3-29/32”
Front Center Rail
D
Shelf
Rear Mounting Holes
D
A
B
C
Bottom Mounting Holes
1-3/4”
1-3/4”
Bottom
of front
center rail
11/16”
1-5/16”
D
1-3/4”
2”
1-5/16”
11/16”
D
1-3/4”
2”
15/32”
Measure and mark center line of cabinet bottom.
Mark center of cabinet rail for screw placement.
Rear Bracket Measurements
Front Center Rail
D
Shelf
Rear Mounting Holes
D
A
B
C
Bottom Mounting Holes
1-3/4”
1-3/4”
Bottom
of front
center rail
11/16”
1-5/16”
D
1-3/4”
2”
1-5/16”
11/16”
D
1-3/4”
2”
15/32”
(Face Frame) Measure the reveal behind the center rail (D) and add to the measurements shown.
(Frameless) Measure and mark from center line as shown.
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll-free customer help line available weekdays between
7:00am and 6:00pm CST at 800-463-0660.
TOOLS NECESSARY:
Screw gun, Phillips screwdriver, tape measure and square.
NOTE: If screw gun has a clutch, set to lowest setting so as not to
over tighten and/or strip screws.
PARTS IDENTIFICATION:
A
Mounting Base
1 pcs
B
Pantry Pullout Unit
1 pcs
C
#10 x 1-1/2” Pan Head Phillips Wood Screw
4 pcs
D
5/16-18 x 1.25 Pan Head Phillips Machine Screw
4 pcs
E
#18 x 5/16 Metal Washer
4 pcs
F
Almond Snap-in Cover
2 pcs
G
#8 x 5/8 Pan Head Phillips Wood Screw
8 pcs
H
#8 x 5/8 Flat Head Phillips Wood Screw
4 pcs
Pantry Pullout
Installation Instructions
for the PPO2 Series
C
A
E
F
H
B
D
D
G
E
Front Center Rail
D
Shelf
Rear Mounting Holes
D
A
B
C
Bottom Mounting Holes
1-3/4”
1-3/4”
Bottom
of front
center rail
11/16”
1-5/16”
D
1-3/4”
2”
1-5/16”
11/16”
D
1-3/4”
2”
15/32”
(Inside cabinet view)
(Face Frame)
Part #
A
B
PPO2-5
1-1/4”
5/8”
PPO2-8
2”
1”
PPO2-11 4-5/16” 2-3/16”
PPO2-14 6-5/16” 3-5/32”
PPO2-5
PPO2-8 • PPO2-11 • PPO2-14
