Strona
8
z
16
Make sure that:
•
The luminaire is suitable for the hazardous area existing at the installation site;
•
The group of apparatus is suitable for gases, vapours and/or dust present at the installation site;
•
The temperature class and surface temperature of the device is suitable for gases, vapours and / or dust present
at the installation site;
•
The luminaire is not damaged.
5.2 Installation
OptiLine luminaires have M8 mounting nuts embedded in the GRP lower body. At the place where the nuts are mounted,
the mounting brackets must be fixed with M8/15 mm bolts and M8 spring washers. M8 screws should be tightened with
a torque of 9-10 Nm. Installation of OptiLine luminaires on target mounting surfaces should be carried out in accordance
with the approved mounting positions shown in Figure 3.
WARNING:
IN ANY CASE, THE MINIMUM DISTANCE OF THE LUMINAIRE FROM THE
ILLUMINATED SURFACES SHOULD NOT BE LESS THAN 0,5 M.
Mounting of the brackets to mounting surfaces should be carried out using screws or mounting pins appropriate to the
weight of the device.
WARNING:
FOLLOW THE GENERAL SAFETY RULES.