4 - Set-Up
4. 2
Transporting Mistblower
Truck transport
Preparing Mistblower for transport
To prepare the mistblower for transport consider the following points;
•
Mistblower is emptied
•
Mistblower is clean and decontaminated
•
Items such as boom arms are secured to prevent movement during transit
•
Carry out visual inspection to make sure that no items can come loose during transit
Securing Mistblower for transport
When securing the mistblower on to a truck trailer, make sure the trailer is of adequate size and properly placarded
with safety signs should they be required.
Do not allow heavy objects to be loaded on top of the mistblower as this may cause damage to mistblower
components or surface finishes.
Tie down the mistblower adequately to prevent movement during transport.
Loading or Unloading the mistblower from a truck
When loading or unloading the mistblower from a truck trailer with the aid of a block and tackle or crane, use the
lifting points shown in the illustration, and make sure that the straps or cords used for the purpose are strong
enough and comply with Australian Safety Standards.
Summary of Contents for Mercury Covamax series
