background image

Q. Will my Camp Lighting Kit run from 110V / 240V power outlet?

A. Yes, you must first purchase a HARD KORR

®

 transformer if you wish to power 

     your kit from 110V / 240V mains power.

Q. How does my Camp Lighting Kit go together? 

A. For the first time installation we suggest you start from the cigarette lighter with the 3m 
     cable. This way you will start with the right male connector, from there you can configure 
     the lighting to suit the area you want to light up. 

Q. Are my lights weatherproof?

A. Yes all lights and cables are weatherproof, however the supplied dimmers are not.

Q. What do I do if my lights don’t work?

A. First make sure you have a charged 12V battery to run from, or if coming from a 12v cigarette 
     input inside your vehicle, please make sure ignition is switched on.
     If the kit is still not working, try directly from car battery. Next, please try connecting a 
     transformer to mains power.
     If you are still experiencing difficulties after following these steps, please contact our 
     customer service team.

Q. What do I do if my controllers are not working properly?

A.  Firstly, please make sure you have not put 2 dimmers on the same line of cable. 
      To avoid this, please use the supplied splitter cables.
      If you are still experiencing difficulties after following these steps, please contact our 
      customer service team.

Q. How many light bars can I run from each dimmer?

A. You can run up to 3 light bars from each dimmer.

Q. Why are magnets on back of light bars?

A. This is so you can fix light bars to poles in the tent or camper easily.

Q. Can I run these lights off a generator?

A. Yes, you can connect to a generator using a HARD KORR

® 

transformer

 

(purchased separately)

.

Q. What do I do if some lights work and some don’t?

A. You may have a faulty lead. Please check the light directly from the cigarette or transformer 
      lead. If all lights are working, please test each cord between the light and power until you 
      find the faulty cord.
      If you are still experiencing difficulties after following these steps, please contact our 
      customer service team.

Q. Where do I send back items that may need to be replaced under warranty.

A. For warranty information and replacements please contact your place of purchase.

8

5

Frequently

Asked Questions

Features

PRESSED IN MAGNET

SEALED GROMMET ENDS

Summary of Contents for Orange & White Camp Lighting Kit






Reviews: