Page 3
For technical questions, please call 1-888-866-5797.
Item 66784
Sa
Fety
Opera
ti
O
n
Maintenance
Setup
electrical Safety
1.
Do not expose pumps to rain or wet
conditions.
Water entering a pump will
increase the risk of electric shock.
2.
Do not abuse the power cables. never use
the cables for carrying or pulling the pump.
Keep cables away from heat, oil, sharp edges
or moving parts. Damaged or entangled
cables increase the risk of electric shock.
personal Safety
1.
Stay alert, watch what you are doing and use
common sense when operating a pump. Do not
use a pump while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while operating pumps
may result in serious personal injury.
2.
prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to the power supply.
3.
Do not overreach. Keep proper footing
and balance at all times. Proper footing
and balance enables better control of
the pump in unexpected situations.
4.
use safety equipment. A dust mask, non-
skid safety shoes and a hard hat must be
used for the applicable conditions.
5.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
6. Wear ANSI-approved safety goggles
during setup and use.
pump use and care
1.
Do not force the pump. use the correct
pump for your application. The correct
pump will do the job better and safer at
the rate for which it was designed.
2.
Do not use the pump if the switch does not turn
it on and off. Any pump that cannot be controlled
with the switch is dangerous and must be repaired.
3.
Disconnect the cables from the power
supply before making any adjustments,
changing accessories, or storing pumps.
Such preventive safety measures reduce
the risk of starting the pump accidentally.
4.
Store idle pumps out of the reach of children and
do not allow persons unfamiliar with the pump or
these instructions to operate the pump. Pumps
are dangerous in the hands of untrained users.
5.
Maintain pumps. check for misalignment or
binding of moving parts, breakage of parts
and any other condition that may affect the
pump’s operation. if damaged, have the
pump repaired before use. Many accidents
are caused by poorly maintained pumps.
6.
use the pump, accessories and pump bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
pump for operations different from those
intended could result in a hazardous situation.
Battery precautions
under abusive conditions, liquid may be ejected from the battery. avoid contact. if
contact accidentally occurs, flush with water. if liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
pump service must be performed only by qualified repair personnel, using only identical replacement parts.
This will ensure that the safety of the pump is maintained.