background image

Page 3

For technical questions, please call 1-800-444-3353.

SKU 92942

do not overreach.  Keep proper 

c. 

footing and balance at all times.

  

This enables better control of the 

assembly tools in unexpected 

situations.

dress properly.  do not wear 

d. 

loose clothing or jewelry.  Keep 

your hair, clothing and gloves 

away from moving parts.

  Loose 

clothes, jewelry or long hair can 

be caught in moving parts during 

assembly.

Specific Safety Warnings

Do not attempt to assemble 

1. 

Canopy when high wind conditions 

exist as personal injury and/or 

damage to the Canopy may result.
Verify that Canopy is assembled 

2. 

and firmly secured (using T-stakes 

provided) on a flat, level surface to 

avoid accidents.

Do not allow snow to accumulate 

3. 

on the Canopy; the Canopy could 

collapse.

caution!

4. 

 Heavy, wet snow or 

extreme windy conditions could 

damage the Car Canopy.  It is 

recommended that the Tarp be 

removed under these conditions to 

prevent damage to the Car Canopy.
Maintain Canopy with care. Keep the 

5. 

Canopy clean, dry and free of oil, 

grease, liquids and other debris.
Maintain labels and nameplates on 

6. 

Canopy.  These carry important safety 

information.  If unreadable or missing, 

contact Harbor Freight Tools for a 

replacement.
Do not use Canopy for any purpose 

7. 

other than for what it was intended.  

Do not use Canopy as a source of 

long-term shelter.

The warnings, precautions, and 

8. 

instructions discussed in this 

instruction manual cannot cover all 

possible conditions and situations that 

may occur.  It must be understood 

by the operator that common sense 

and caution are factors which cannot 

be built into this product, but must be 

supplied by the operator.

SpeciFicationS

Base 

Dimensions

20’ 8-1/2” L x 20’ 6” W

Center Height 10’

Side Height

69-1/4”

Frame Width

18’ 1”

Pole Tubing 

Diameter

1-1/4”

Connector 

Diameter

1-1/2”

Tarp

14 x 14 mesh, 1000 denier nylon 

thread

unpacKing

When unpacking, make sure that 

the item is intact and undamaged.  If any 

parts are missing or broken, please call 

Harbor Freight Tools at 1-800-444-3353 as 

soon as possible.

caution! 

Be alert to possible 

wind damage; prolonged exposure to 

wind can cause fasteners and hardware 

to loosen as the frame flexes.  The 

Car Canopy’s frame strength will be 

compromised if fasteners and hardware 

are not tight.  Periodically check and make 

sure all fasteners and hardware are tight.  

Tubes, stakes, tie downs and rope should 

also be periodically checked to make sure 

the unit is always structurally rigid. 

 

 

 

 

Summary of Contents for BIG TOP 92942







Reviews: