SIZE:140x205MM
610-51202-00xR
white paper print black words
610-51202-00xR
1
2
3
1
2
3
4
5
F
WIRELESS KEY FINDER
Model
97146
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in
the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in injury.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
1.
Do not expose the Key Finder to rain or wet conditions. Water entering this
2.
product will damage it.
This product is not intended for outdoor use.
3.
Use safety equipment. Always wear eye protection during installation.
4.
Prolonged exposure to noise levels above 85 dB is hazardous to hearing. Turn
5.
the Receiver off, before retrieving it. Never hold it near anyone’s ear.
Maintain labels and nameplates on the product. These carry important safety
6.
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
This product is not a toy. It includes small parts. Keep it out of reach of
7.
children.
Position batteries in proper polarity. Do not install batteries of different types,
8.
charge levels, or capacities together.
This device complies with part 15 of the FCC Rules. Operation is subject to the
9.
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. (FCC ID # NS3LELUX512)
Page 4
SKU 97146
For technical questions, please call 1-800-444-3353.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO
THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
PARTS LIST & ASSEMBLY DIAGRAM
Part
Description
Qty
1
Transmitter Base
1
2
Transmitter
1
3
Receiver
2*
*Additional receivers available as replacement parts. Specify which desired receiver color when ordering.
Record Product’s Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
