APS12/APS15
www.harbingerproaudio.com
Made in China
MIC 1 IN
MIC 2 IN
INPUTS
OUTPUTS
LINE IN
L
R
LINE OUT
CAUTION: TO REDUCE THE RISK OF FIRE,
REPLACE FUSE WITH THE ASME TYPE AND
RATING. DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE. INDOOR USE ONLY.
AC
~
: 110V/120V-
50/60Hz
285VA MAX
FUSE: T2A 250V
POWER
Harbinger Pro Audio
Thousand Oaks, CA USA
ACTIVE POWERED SPEAKER
1. MIC Inputs
Two MIC input pairs. Each one accepts a high-impedance
1/4” jack and/or a low-impedance XLR connection. For best
results, use a low-impedance microphone and a properly
wired cable. The 1/4” inputs are designed for low line-level
signals such as microphones or acoustic guitars. Standard
line-level signals should be connected to the Dual RCA or XLR
line input.
2. LINE Input
Accepts line-level signals through the Dual RCA jacks or the
single XLR connector.
3. LINE Out
Sends signal out before the power amp, so you can connect
to another active speaker or any other device that accepts a
line level signal.
4. Power Switch
Switches the unit on or off. Be sure to turn the MASTER level
down before you turn the unit on.
5. FUSE & AC
This is a power socket with a FUSE holder.
Back Panel
3
1
2
3
4
5
1
2
4
5
3
9552 Harbinger APS12 APS15 Consolidated Manual.indd 4
3/29/11 11:32 AM
