background image

ENGLISH

8

 - By setting the timer again before the set time has elapsed, you avoid the 3-minute waiting 

time which is necessary to allow the tanning lamp to cool down.

 8 

 Always unplug the appliance after use.

Tip: Keep track of the overall number of sessions you have had on a piece of paper.

Cleaning 

Always unplug the appliance and let it cool down before you clean it.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or 

acetone to clean the appliance. 

 1 

 Clean the outside of the appliance with a damp cloth. 

Do not let water run into the appliance. 

 2 

 Clean the UV filter with a soft cloth sprinkled with some methylated spirits.

 3 

 Clean the protective goggles with a moist cloth.

Storage

 1 

 Unplug the appliance.

 2 

 Let the appliance cool down for 15 minutes before you store it.

 3 

 Wind the cord round the cord storage facility on the back of the appliance (Fig. 4).

Replacement

Lamp

The light emitted by the tanning lamp becomes less bright in time (i.e. after a few years in case 

of normal use). When this happens, you notice a decrease in the tanning capacity. You can 

solve this problem by setting a slightly longer tanning time or by having the tanning lamp 

replaced. 

Always have the tanning lamp replaced by a service centre authorised by Hapro. Only they 

have the knowledge and skills required for this job and the original spare parts for your 

appliance.

UV filter

Never use this appliance when the UV filter is broken, damaged or missing. Always have the UV 

filter replaced right away when it is damaged or broken.

Always have the UV filter replaced by a service centre authorised by Hapro. Only they have the 

knowledge and skills required for this job and the original spare parts for your face tanner.

Protective goggles

Additional or replacement goggles can be ordered at your local dealer.

Environment

Do not throw away the appliance with the normal household waste at the end of its life, but 

hand it in at an official collection point for recycling. By doing this, you help to preserve the 

environment (Fig. 5).

The lamp of this appliance contains substances that may pollute the environment. When you 

discard the lamp, do not throw it away with the normal household waste, but dispose of it at 

an official collection point.

Summary of Contents for HB404 SUMMER GLOW










Reviews: