background image

if the skin gets taut and tender after the session), we advise you to reduce the length of the 

sessions by e.g. 5 minutes.

 

Note:For a beautiful, even tan, turn your face to the left and right from time to time during the 

session so that the sides of the face are better exposed to the tanning light. 

Note:If your skin feels slightly taut after tanning, you can apply a moisturising cream.

Duration of the 

tanning session for 

each side/part of the 

body

for persons with 

very sensitive skin

for persons with 

normal sensitive 

skin

for persons with 

less sensitive skin

1st session

8 minutes

8 minutes

8 minutes

break of at least  

48 hours

break of at least  

48 hours

break of at least  

48 hours

break of at least  

48 hours

2nd session

10-15 minutes

20 minutes

25-30 minutes

3rd session

10-15 minutes

20 minutes

25-30 minutes

4th session

10-15 minutes

20 minutes

25-30 minutes

5th session

10-15 minutes

20 minutes

25-30 minutes

6th session

10-15 minutes

20 minutes

25-30 minutes

7th session

10-15 minutes

20 minutes

25-30 minutes

8th session

10-15 minutes

20 minutes

25-30 minutes

9th session

10-15 minutes

20 minutes

25-30 minutes

10th session

10-15 minutes

20 minutes

25-30 minutes

Using the appliance

 1 

 Place the appliance on a solid, flat and stable surface.

 2 

 Fully unwind the mains cord.

 3 

 Put the plug in the wall socket.

 4 

 Position yourself in front of the appliance.

 5 

 Put on the protective goggles provided.

 - Only use these protective goggles when you tan with a Hapro tanning appliance. Do not 

use them for other purposes.

 - The protective goggles comply with protection class II according to directive 89/686/EEC.

 6 

 Check the distance between your body and the tanning appliance.

 - During tanning, the distance between the UV filter and the part of the body to be tanned 

must be at least 65cm.  (Fig. 2)

 - Use the measuring tape to check the distance.

 7 

 Switch on the appliance by setting the timer to the required tanning time (Fig. 3).

Note: For the correct tanning times, see section ‘Tanning sessions: how often and how long?’

 

When the set time has elapsed, the timer automatically switches off the appliance.

 - If you want to tan more parts of your body successively, you can set a new time before the 

set time has elapsed. 

ENGLISH

7

Summary of Contents for HB404 SUMMER GLOW










Reviews: