When the speaker is in bluetooth connection
working mode.
Use the bluetooth speaker answer the
phone call in hands free when there is a
phone call in.
Hold down this button for 3 seconds to
disconnected the bluetooth connections, the
speaker will turn to pairing other matching
bluetooth device when you hear the voice
prompt of
Device Disconnected ,Pairing
Device.
Press this button each time you will
hear the voice prompt of
Pairing Device
when the speaker without bluetooth
connection status.
USER MANUAL
-1-
-2-
-3-
-4-
-7-
-6-
-5-
FEATURES
PANEL
BLUETOOTH
INDICATOR
1
2
3
1. STANDBY
2. VOLUME-
3. MICROPHONE
1. POWER ON/OFF
2.
3.
DC IN 5V
AUX INPUT(3.5MM)
4.USB CHARGING FOR EXTERNAL DEVICE
Thanks for your purchase of our product.
Please read through this manual before
making connections and operating this
product. Retain this manual for future
reference.
Bluetooth playback
AUX input
Power supply: DC-5V
Note:
Use DC adapter or USB terminal to
charge battery no matter the speaker power
on or off.
In low battery status, the bluetooth
speaker will emit once
Battery Low,Please
Charging
voice prompt per five minutes and
it will switch off automatically if no charged in
low battery status.
Power consumption:5W
Speaker max output: 2WX2
Note:The bluetooth speakr will turn to
standby mode after 15 minutes in the
absence of no source status,standby power
is less than 0.5W.
VOLUME-
When the speaker is in working mode,
press to turn down the volume.
You will hear the beep sound when you
turn down to the minimum volume.
When the speaker is in working mode,
press to turn up the volume.
You will hear the beep sound when you
turn up to the maximum volume.
AUX IN
PRECAUTION
Do not drop any objects into the unit through the
openings.
Do not spill or spray liquid of any kind on or in the
unit. It may result in a fire or electric shock.
Do not place anything heavy on the unit.
To ensure proper ventilation and proper
operation, never cover or block the slots and
opening with a cloth or other materials.
Keep the unit away from an open flame such as
fire, candle, etc.
Install the batteries correctly.
Please dispose the batteries according to the
local rule and law.
The maximum working temperature is 35
degrees Celsius.
Only use attachments/accessories specified by
the manufacturer.
Where the Mains plug is used as the disconnect
device, the disconnect device shall remain readily
operable.
Rating label are on the bottom of the unit.
WARNING: The batteries shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is
incorrectly replaced.Replace only with the same or
equivalent type.
BLUETOOTH SPEAKER
Happy Plugs
4.
5. BLUETOOTH
2 3 4
1
1
1. BLUETOOTH INDICATOR
2. CHARGING-INDICATOR
Power on the speaker by sliding the
ON/OFF switch to the ON position and press
the standby button, the red and the blue
indicator flashing alternately, you will hear
ACCESSORY
User manual
USB cable
This speaker has an extra group of audio
input terminals. You can input the analogue
stereo audio signals from extra devices such
as mobile phone, computer,MP3 player, etc.
Use the audio cable to connect the audio
output terminals of mobile phone, computer,
MP3 player to the audio input terminal (AUX
IN) of this speaker.
If BT is connected,plug in AUX in cable,you
have to pause the music in the connected
device to start play music through AUX in.
If BT is connected,plug in AUX in cable,you
can disconnect the speaker to give priority to
aux in,too.
CHARGING FOR EXTERNAL DEVICES(5V)
.
Use the USB cable to connect the USB slot
of the player to other device input terminals
to charge battery ,likes mobile phone, etc
Please note the charge port could charge
battery no matter in standby status or power
on status.
the voice prompt of
Sound Piece Ready To
Go,Pairing Device
, the speaker is in
searching bluetooth signal status.
The blue indicator flashing once per 2
seconds means bluetooth was connected,
you will hear the voice prompt of
Device
Connected
, and the model of the speaker
will shows on your device.
The bluetooth speaker will go into power
off and it emit
Sound Piece Going To Sleep
voice prompt if hold down the standby button
in power on status.
It is better to switch off the unit before
charging. The charging-indicator changing
from red to light off indicates that the battery
has been fully charged.
5
4
2
Sound Piece mini
