Please read the safety information carefully before use, and use the product correctly.
The alerts declared in the manual are classified into
Danger
,
Warning
and
Caution
according to their importance
▍Safety information
▍Suffix code
CAUTION
• This product is not for outdoor use (it may shorten the product lifetime and cause electric shock)
• Do not use this product in places with flammable or explosive gases (it does not have an explosion-proof structure, so there are fire
or explosion risks)
• Do not use the product in places where vibrations or shocks exceed the reference values (it has a double insulation
structure, but the components may be damaged)
• Never use it on AC power.
• Be careful of wiring. It may cause explosion, fire, or machine breakdown.
• Do not use the product in a state where the product body or
cable is crashed.
• Do not disassemble, repair or modify the product.
• When the lens of the photo sensor is contaminated by foreign
substances, use a dry piece of cloth and wipe off the
substance lightly. Never use thinner or organic solvents.
• Separate high voltage cable and power line from the sensor wire.
Be cautious since using the same pipe during wiring could cause
malfunction.
• If the cable needs to be extended, use over 0.3 ㎟ and be
cautious because of a possible sudden voltage drop.
• When using the sensor under lights with high frequency, such as
fluorescent lamps or mercury lamps, block it with a light
shading plate and avoid the lens from facing the light directly.
• Malfunction can occur due to mutual interference when using
more than 2 pairs of through-beam type photo sensors. Therefore,
leave enough space for the mutual separation distance and install
the light emitters and the light receivers in alternating positions.
• Using inductive load (relay, coil) for the output can cause an
instantaneous increase in load by more than two times and damage
the TR of the output. Therefore, please set half of the maximum load.
• There is an over-current protecting circuit within the output side
that breaks the output when the current is higher than the rated
load current. Therefore, please set within 70% of the maximum load.
• Do not use the product in places with heavy dust or debris that
can contaminate the lenses and consequently cause malfunctions.
• The contents of this manual may be changed without prior notification
• Any use of the product other than those specified by the
manufacturer may result in personal injury or property damage.
• When using the Switching Power Supply as power source,
ground the Frame Ground (F.G.) terminal and be sure to connect
the noise-cancelling condenser between OV and F.G. terminals
▍Dimensions
▍Output circuit
※ Diffuse-reflective, distance-settable, retro-reflective, receiver of through-beam types only
(however, the emiiter of through-beam type has 12 - 24 VDC power input only.)
■ NPN TYPE
NPN TYPE
NPN TYPE
Overcurrent
protection
circuit
Load
Brown (BRN)+V
Brown (BRN)+V
Black
(BLK)OUT
Black
(BLK)OUT
12 - 24
VDC
Blue (BLU) 0 V
Blue (BLU) 0 V
100 mA Max.
Internal circuit
Internal circuit
External connection example
External connection example
■ PNP TYPE
NPN TYPE
NPN TYPE
12 - 24
VDC
100 mA Max.
Load
28, Gilpa-ro 71beon-gil,
Michuhol-gu, Incheon, Korea
TEL : +82-32-876-4697
http://www.hynux.com
HANYOUNGNUXCO.,LTD
General Purpose Photo Sensor
PB
series
Thank you for purchasing Hanyoung Nux products.
Please read the instruction manual
carefully before using this product, and use the product correctly.
Also, please keep this instruction manual where you can see it any time.
MK2101KE181126
INSTRUCTION MANUAL
■ Sensitivity adjustment
■ Operation mode
- min. rotation direction (counterclockwise): Minimum sensitivity
- max rotation direction (clockwise): Maximum sensitivity
- D rotation direction (counterclockwise): Dark ON mode
- L rotation direction (clockwise): Light ON mode
※Turn the volume switch all the way
when switching modes.
(※Note 1) When using HY-M5S 0.1 to 4 m
(※Note 2) Red LED flashes in case of overload. (ON Time: 200 ㎲, OFF Time: 40 ㎲)
▍How to install
▍Motion chart
▍How to set sensitivity and operation mode
1.5
31
12
3.8 Ø
25.4
20
2-M3 TAP
2-M3X0.5 L=8
25.4
20
12
16.2
7.5
31
6
6
6
6
36
3.4
Ă3.5
20Ā
3.4
7
6.7
4.5
10.5
R20
14Ā
14
R1.7
2-M3X0.5 L=8
12
31
25.4
20
Ă3.5
13.7
39
29
10Ā
10Ā
■ Mirror HY-M5, HY-M5S (sold separately)
■ Volume driver
7.5
40.3
2-Ø3.5
34
7.0
2.7
59.9
52
8
1.6
▍Accessory
■ Bracket A
31.2
23.2
3.5
26
Ø3.2
20
º
14
35.5 39
3.5
R23.8
16
22.23
10
Ø3.2
25.4
25.4
2-Ø
3.1
3.5
36
19.2
6.6
3.5
5
6
13
2-M3 T
AP
25.4
29
36
9.5
21
1.5
13.5
8.7
16.2
36
6
6
6
6
3.4
6
4.5
29
3.4
7
13.7
14
º
1.2
1.2
10º
■ Bracket B (sold separately)
31.2
23.2
3.5
26
Ø3.2
20
º
14
35.5 39
3.5
R23.8
16
22.23
10
Ø3.2
25.4
25.4
2-Ø
3.1
3.5
36
19.2
6.6
3.5
5
6
13
2-M3 T
AP
25.4
29
36
9.5
21
1.5
13.5
8.7
16.2
36
6
6
6
6
3.4
6
4.5
29
3.4
7
13.7
14
º
1.2
1.2
10º
■ Bracket C (sold separately)
31.2
23.2
3.5
26
Ø3.2
20
º
14
35.5 39
3.5
R23.8
16
22.23
10
Ø3.2
25.4
25.4
2-Ø
3.1
3.5
36
19.2
6.6
3.5
5
6
13
2-M3 T
AP
25.4
29
36
9.5
21
1.5
13.5
8.7
16.2
36
6
6
6
6
3.4
6
4.5
29
3.4
7
13.7
14
º
1.2
1.2
10º
5.5
2
Brackets B
M3 X 12mm
Tightening torque should
be max. 0.5N.m
unit : mm
Operation indicator
Output
Stability indicator
Operation indicator
Output
Stability indicator
Unstable Light ON area
Unstable Dark ON area
Stable light Dark ON region
Dark ON
Operation mode
Light ON
Stable Light ON area
WARNING
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor injury or property damage
• The input/output terminals are subject to electric shock risk. Never let the input/output terminals come in contact with your body or
conductive substances.
DANGER
Main cir
cuit
Main cir
cuit
Model
NPN
PB-T7N
PB-T10RN PB-T15N
PB-M3RN
PB-R01N PB-R04RN PB-R1N
PB-D04N
PNP
PB-T7P
PB-T10RP PB-T15P
PB-M3RP
PB-R01P PB-R04RP PB-R1P
PB-D04P
Sensing
mode
Through-beam
Retroreflective
(mirror)
Diffuse-reflective
Distancesettable
Sensing distance
7 m
10 m
15 m
0.1 ~ 3 m
(※Note 1)
0.1 m
0.4 m
1 m
0.4 m
Hysteresis distance
─
20% or less of detection distance
Detecting object
Opaque Ø12 mm or more
Ø75 mm
more (Opaque)
White non-glossy paper (100 x 100 mm)
Light source
(wavelength)
IR(860nm) RED(640nm) IR(860nm) RED(640nm) IR(860nm) RED(640nm) IR(860nm)
IR(860nm)
Current consumption
Emitter: max. 20 mA,
Receiver: max. 20 mA
Max. 30 mA
Power voltage
12 - 24 VDC ±10 % (Ripple max. 10 %)
Control output
NPN or PNP open collector output
▪ Load current - max. 100 mA (26.4 VDC standard)
▪ Residual voltage - NPN: max. 1 V, PNP: max. 1 V
Operation mode
Light ON / Dark ON switch
Protection
circuit
Common
Power reverse connection protection, Output reverse connection protection,
Output short-circuit over-current protection, Output short-circuit alarm (Note 2)
Individual
─
Mutual interference prevention function
Response time
1 ms or less
Insulation Resistance
More than 20 MΩ (500 VDC mega)
Noise immunity
Square wave noise by noise simulator (pulse width 1 s) ± 240 V
Dielectric strength
1,000 VAC (50/60 Hz for 1 minute)
Vibration resistance
10 - 55 Hz, Double amplitude : 1.5 mm, X·Y·Z 2 in each direction for 2 hours
Shock resistance
500 , X·Y·Z each direction 3 times
Ambient illumination
Sunlight : max. 11,000 lx / Incandescent: max 3,000 lx
Ambient temperature
During operation : -25 ~ +55 ℃, During storage : -40 ~ +70 ℃ (Without condensation or icing)
Ambient humidity
35 ~ 85 % RH (Without condensation)
Degree of protection
IP65 (IEC standard)
Certification
Material
Case
PBT GF30 %
Display
PC
Lens
PC
Accessory
Common
Brackets A, volt (M3 X 12 mm), Volume driver
Individual
─
Mirror (HY-M5)
─
Optional
Brackets B, Brackets C, Mirror (HY-M5S)
Weight
Approximately 90g
Approximately
60g
Approximately 50g
※However, the emitter has one red power indicator at the center
Operating mode
switching volume
Sensitivity
adjustment volume
Operation indicator
Stability indicator
Overcurrent
protection
circuit
All manuals and user guides at all-guides.com
all-guides.com
