manualshive.com logo in svg

Hanwha Techwin WISENET QRN-830S, User Manual, Page: 99 / 126

Share
Download
Hanwha Techwin WISENET QRN-830S User Manual Download Page 99

English 

_99

bOOKMARK SEARCH

You can search for bookmarked data.

1. 

Select <

bookmark Search

> in the <

Search

> menu.

2. 

Select a channel to search.

3. 

Select the date and time to search.

4. 

Click the <

Search

> button.  

The search results list will be displayed.

● 

Bookmark name: Displays the bookmark name you set.

● 

Event: Displays the event type of the recorded video.

● 

CH: Displays the recorded channel.

● 

Time: Displays the start time and end time of the recorded video.

● 

Playback : Plays the recorded video with an instant viewer.

● 

Bookmark: Displays whether bookmarks are specified.

￭ 

Bookmarked images will be stored without being overwritten during repeated recording. However, when the automatic deletion is set, it will be deleted 
according to the set period.

￭ 

When the bookmark is released, the video will not be saved. If necessary, before releasing the bookmark, export the video. 

￭ 

Up to 100 bookmarks can be specified. 

SEARCH RESulTS ExPORT

Search results of events, texts and bookmarks can be exported to a file.

Example) bookmark search result export

1. 

Click < 

 > in the search results list.

2. 

Select the desired list and click <

OK

>.

￭ 

The exported video is saved as .avi file in the download folder.

￭ 

In the <

Text search

> results, you can also click < 

 > to export to a .csv file.

•

  SEAR

CH
 VIE
WER

 

Summary of Contents for WISENET QRN-830S































































































































Reviews:

No comments