Video Wall Controller Series
Manual
2.
Safety Precautions
WARNING: Read these instructions carefully! Follow all warnings and instructions specified within this document and/or on
the equipment. All cautions should be noted.
CAUTION: The unit will be powered on upon connecting a valid power supply source. Please make sure to properly shut-
down the device’s operating system prior to removing power.
1.
Keep this User Manual for later reference.
2.
WARNING: Eight1080, Nano4K and Six4K MUST be EARTHED. The appliance uses a three-wire earthed power system,
the input power connector which is equipped with a third pin, is to earth the unit and prevent electric shock. Do not
defeat the purpose of this pin. You must use a 3 pin IEC C13 power cable. If your outlet does not support this kind of
plug, contact your service person to replace your obsolete outlet and install the appliance safely.
3.
Disconnect this equipment from any AC outlet before cleaning. Use a soft damp cloth. Do not use liquid or spray
detergents for cleaning. Ensure dry before turning on.
4.
Keep this equipment away from liquids. Never pour any liquid into an opening. This may cause fire or electrical shock.
5.
For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
6.
Put this equipment on a stable surface during installation. Dropping it or letting it fall may cause damage.
7.
The openings on the enclosure are for air convection to protect the equipment from overheating. DO NOT COVER
OPENINGS.
8.
Ensure voltage of the power source is correct before connecting the equipment to the power outlet.
9.
Place the power cord in a way so that people will not step on it. Do not place anything on top of the power cord. Use
a power cord that has been approved for use with the product and that it matches the voltage and current marked on
the product’s electrical range label. The voltage and current rating of the cord must be greater than the voltage and
current rating marked on the product.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient
overvoltage.
12.
WARNING: Never open the equipment. For safety reasons, the equipment should be opened only by qualified service
personnel. NOTE: Opening the equipment case will void the warranty.
13.
If one of the following situations arises, get the equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work correctly, or you cannot get it to work according to the user manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage i.e. Rattling sounds
14.
Do not place heavy objects on the equipment.
