Hanway XRAY125S 2019, Operation Manual

Page: 37 / 43

Troubleshooting
34
Troubleshooting
If the engine refuses to start, perform the following inspections to
determine the cause.
1. Open the key, meanwhile listen the EFI pump works or not.
2. Open the fuel tank, look Is there enough fuel or look the fuel
gauge in speedometer.
Caution
Do not allow the fuel to spill. Do not allow any fuel to come in contact
with the hot engine or exhaust system. Extinguish any smoking materials
by from any other fire or heat source.
1. Remove the spark plug and reattach it to the spark plug lead.
2. While holding the spark plug firmly against the engine, crank the
engine with the ignition switch in ON position. If the ignition
system is operating properly, a blue spark should jump across the
spark plug gap. If there is no spark, consult the dealer for repairs.
Caution
Do not hold the spark plug close to the open spark plug hole in the
cylinder head as gasoline vapor inside the cylinder could be ignited,
creating a fire hazard.
To reduce the chance of electrical shock, hold the metal shell of the
spark plug against an unpainted metal portion of the engine. Due to the
possibility of electrical shock, anyone with a heart condition or pacemaker
should avoid this check.
Engine Stalling
1. Check the fuel supply in the fuel tank.
2. Check the ignition system for intermittent spark.
3. Check the engine idle speed.
Caution
When the MI Indicator warning light appears during running
please consult your dealer.
It is best to consult the dealer before attempting to troubleshoot any
problem. If the machine is still within the warranty, then the dealer should
definitely be consulted before you attempt any repairs on the machine.
Tampering with the machine yourself in warranty may affect warranty
consideration.