Hanway STM125 2019, Operation Manual

Page: 25 / 43

Riding Tips
22
Riding Tips
Start the Engine
Caution
Before starting, you must

Check the quantity of fuel and engine oil.

Check the battery is there a loose connection or lack of power? If that
happens, don’t start the vehicle, otherwise it's easy to damage the
ECU.
Insert the ignition key into the ignition switch and turn it to ON position.
When the engine is cold:
1. Squeeze the rear or front brake lever.
2. Push the starter button.
3. Let the engine warm up after being started.
When the engine is warm:
1. Squeeze the rear or front brake lever.
2. Open the throttle 1/8~1/4.
3. Push the starter button
Caution

Release the starter button soon after the engine is started. Otherwise
damage may be done to the engine.

If the engine remains unstarted after several starting, turn the throttle
grip by 1/8~1/4 and try again. The grip should be released soon after
the engine is started.
Start off
1. Release the side stand.
2. Mount on the motorcycle.
While holding the handlebars with both hands, mount on the
motorcycle from left side and sit on the seat. Support yourself with your
left foot. You still need to squeeze brake lever at this moment.
Caution
No turning of the throttle grip is allowed before you are ready to set out.