Hanway STM125 2019, Operation Manual

Page: 15 / 43

Functions of Controllers
12
Switches on the Handlebars
①
Dimmer Switch
This switch is used to change the headlamp beam. When you turn the
switch to:
HIGH
The high beam is turned on.
LOW
The low beam is turned on.
②
Turning Signal Lamp Switch
This switch is used to turn on/off the left/right turning signal lamps to
show the other vehicles that you want to turn leftward/rightward. When you
turn the lever to:
Right
The right signal lamps flash.
Left The left signal lamps flash.
Center
Push in the switch at the center position to
cancel the turn-signal operation.
①
②
③
④
⑤