English_23
●
C
amer
a
Oper
a
ti
O
n
y
AGC (OFF/LOw/MIDDLE/HIGH/VERY HIGH)
:
The higher the gain level, the brighter the screen - but the greater the noise.
y
SSNR4 :
This function reduces the background noise in a low luminance environment.
- OFF : Deactivates SSNR4. Noise is not reduced.
- ON : Activates SSNR4 so that noise is reduced.
M
`
When adjusting the noise reduction level in the SSNR4 mode, remember that the
higher the level set, the more the noise level will be reduced, as will the brightness of
the image.
y
SSDR :
SSDR illuminates darker areas of an image while retaining the same light level
for brighter areas to even out the overall brightness of images with high contrast
between bright and dark areas.
- ON : Use the Function Setup switch to change the SSDR level in the sub menu
according to the contrast between bright and dark areas.
- OFF : Turn off SSDR function.
bACKLIGHT
The camera uses high performance DSP chips that are designed to clearly display the
object and the background despite severe reverse light.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the
Function Setup switch. so that the arrow indicates ‘BACKLIGHT’.
2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
y
uSER bLC :
Enables a user to select a desired area on a picture and
view that area more clearly.
- LEVEL : Adjusts the brightness level of a
monitoring area.
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
- RETURN : Return to the MAIN SETUP menu.
bLC SETuP
▶
1.
LEVEL
M I D D L E
2.
TOP
IIII
I
IIIIIIIIIIIIIIII
3
3.
bOTTOM
IIIIIIIIIIIIII
I
IIIIII
7
4.
LEFT
IIII
I
IIIIIIIIIIIIIIII
3
5.
RIGHT
IIIIIIIIIIIIII
I
IIIIII
7
6.
RETuRN
