Quick start
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
21
The functions that can be achieved by kneading are:
⚫
Knead vertically to adjust the vertical gear of the waveform.
⚫
Knead horizontally to adjust the horizontal gear of the waveform.
Figure 4.13 Kneading gesture
4.5.3 Dragging
After holding down the target, drag it to the desired position as shown in the following
figure. The functions that can be achieved by dragging are:
⚫
Drag the waveform to change the displacement and offset of the waveform.
⚫
Drag the cursor to change the cursor position.
⚫
Drag the trigger to change the trigger position.
Figure 4.14 Dragging gesture
4.6
Setting parameters
Use the touch screen to set the parameters of the instrument.
Click the parameter to be set, and the virtual keyboard will pop up. Set parameters
through the keyboard.
Input a string
When naming a file or folder, you need to enter a string as shown in the following figure.
Summary of Contents for Tablet1000 Series
Page 1: ...Tablet1000 series Tablet oscilloscope User Manual 2022 05...
Page 12: ......