Application measurement
EN
Copyright © Qingdao Hantek Electronic Co., LTD
HBT3000 series user manual
27
Figure 6-4 Set trigger source
6.1.4
Delay function
Set the delay time from the input trigger signal to the start of measurement. If a
trigger signal is input immediately after connecting the test object, the
instrument will start measuring after the measurement value stabilizes by setting
a delay time. The adjustable delay range is 1ms~9999ms, with a default of 1ms.
Click on
[MEA] ->
Delay (ms)
in sequence to set the delay time, as shown in the
figure. Move the cursor position by left and right clicking, and click
[OK]
to input.
Move the cursor to the key
, then click
[OK]
to save and exit.
Figure 6-5 Setting Delay
6.1.5
Absolute value function
The absolute value determination includes [Open] and [Close], and the absolute
value determination defaults to Open. After enabling this function, even if the
battery polarity is reversed, it can still be displayed as a positive value; If this
