Oscilloscope Functions
USER’S MANUAL 42
3.9.3 Self Calibration
Please refer to
3.9.4 Factory Setup
Click
“Factory Setup”
in
“Utility”
menu to load default setups.
When you click the
Factory Setup
in
Utility
menu, the oscilloscope displays the CH1/CH2/CH3
/CH4 waveform and removes all other waveforms.
The oscilloscope set up for normal operation when it is shipped from the factory and can be
recalled at anytime by user.
The Factory Setup function does not reset the following settings:
Language option
Date and time
3.10 Measure Signal
3.10.1 Cursor Menu
Click
“Cursor”
in main menu.
This method allows you to take measurements by moving the cursor.
1.
Source
The user can set the source to
CH1
,
CH2,
CH3
and
CH4
.
When you use cursors, be sure to set the
Source
to the waveform on the display that you want to
measure.
2.
Type