Assembly see page 31
Test certificate
(see page 40)
Spare parts
(see page 37)
XXX= Colors
000 chrome plated
800 stainless steel optic
Cleaning
(see page 38)
and enclosed brochure.
Operation
(see page 36)
Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolonged
period of non-use.
Flow diagram
(see page 35)
C-aerator
aerator 8 l/min
Dimensions
(see page 35)
Do not use silicone containing acetic acid!
Symbol description
U
Safety Notes
U
Gloves should be worn during installation to prevent
crushing and cutting injuries.
U
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fitting must be installed, flushed and tested after
the valid norms.
• As a standard, the mixer is supplied with a C aerator.
If the water jet tends to splash when hitting the sink,
exchange the C aerator for the aerator (comprised in
the delivery) which has a lower flow rate.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 – 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.:
65°C
Thermal disinfection:
≥70°C / max. 4 min
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
The product is exclusively designed for drinking water!
English
4
Summary of Contents for Starck 10822000
