Page GB-18
Heat settings table
2. Once the hob has cooled down, you can
remove stubborn dirt by using a specially
made, commercially available detergent.
3. Treat the hob with a special care product
after cleaning.
Something has boiled over on the
sensors
1. Switch the hob off.
2. Wipe the material that has boiled over us-
ing a soft rag.
3. Wipe the sensor surface with a slightly
damp cloth.
4. Wipe the sensor surface completely dry
with a paper towel.
5. Switch the hob back on.
If the sensors are dirty, e.g. if something
has boiled over, the hob can turn itself
off. You will hear a signal tone. If the sensors
are dirty or damp, they may not work.
