Start-up
Page GB-25
– Make sure that the ambient temperatures
match the climate class of the appliance
(see “Technical data“ on page GB-35).
– Suitable locations are dry, well-ventilated
areas that are cool if possible.
– Unsuitable locations are ones with direct
sunlight or which are directly next to an
oven, hob or radiator.
– If underfloor heating is installed at the set-
up location, place the cooling appliance on
an insulation plate made from solid mate-
rial.
1. Check the position of the appliance with a
spirit level.
(6)
(6)
2. Level out any unevenness on the ground
using both of the front screw feet (6).
3. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
4. Repeat the adjustment until the appliance
is upright and secure. The appliance
should not wobble when opening the
doors.
Attaching the door handles
Please now attach the door handles to the
fridge and freezer doors as desired.
(21)
1. Loosen the screws (21) situated on the
sides of the doors using a Phillips screw-
driver.
(22)
(23)
(25)
(24)
2. Affix the larger handle (21) to the fridge
door (22) using the screws (23), and at-
tach the smaller handle (24) to the freezer
door (25).
Summary of Contents for HKGK 17455 A2IWD
Page 72: ......
