Hanse VTC Series, Installation, Operation And Maintenance Instructions

Page: 11 / 91

Specifications and Utility
Requirements
Hanse Environmental Inc. builds multiple equipment sizes, with various optional
features available, including modification of workspace height, heating and cooling
capacity, and maximum vibration levels. Humidity and altitude chambers are also
available upon request. Information shown is for standard VTC models. Your chamber
may vary if special requests were made at time of purchase concerning workspace
dimensions, product mass or temperature ramp rates, or non-standard line voltages.
Other manufacturers, such as Watlow, provide their own manuals along with the
chamber. Material data sheets are also provided.
Utility Requirements
• Electric: Requirements vary with model and local requirements. Listed below is our
FLA on 480V 3 Phase.
• Liquid Nitrogen: Required pipe size and pressure is listed below in comparison
chart.
• Compressed Air: Required pipe size, pressure, and flow requirements listed below
in comparison chart. Clean dry air is required.
Service Connections
Please see Hanse “Site Preparation manual for VTC Chambers” for all
service connections and dimensions.
This can be Downloaded from www.HanseEnv.com
Authorization and Copyright of this document is
controlled by Hanse Environmental Inc.
11
Comparison Chart