Hansa C7eu O&M Manual - OM-019 revision B 03/09/2018
© Hansa Chippers 2018
3
Assembly
Assemble the chipper body
Place the cardboard block underneath the chipper body - this
makes it easier to attach the wheels.
Item no.
Fastener pack contents (in box 2)
1
One big
spring washer
for swivel handle
2
Two small
spring washers
for wheels
3
One
swivel handle
4
Two
bolts, spring washers, heavy washers,
and
nuts
used to fix
the inlet chute to the chipper body
5
Two
washers
to fix wheels onto the axle
6
Four
cap screws
to attach the wheels and outlet chute to the
chipper body
7
Two
nyloc nuts
to fix screws on outlet chute
8
Two
bolts, spring washers
, and
heavy washers,
used to fix the
outlet chute to the chipper body
1
