2
1.1 Connecting cable
As shown in the below figure, the line is the power cable of the electric control box.
The cable line is 5m long. The control box must be connected to the power supply. This
process must be completed using the corresponding IEC C13 wire connected to the
standard IEC C14 plug on the bottom of the control box.
Note:
The power supply shall be equipped with at least the following accessories:
Grounding;
Fuse of electric supply;
Residual current circuit breaker;
It is recommended that all the devices in the robot application should have a power
supply switch, so as to lock and hang up a sign during the maintenance.
As shown in the following figure, the line is a cable that connects the robot body and
electric control box, with a length of 5m. It connects the machine hand and the electric
control box. The gray end connects the plug of robot base, and the black end connects the
electric control box’s aviation plug.
www.hansrobots.eu
