中文
English
Cleaning Recommendation for Hansgrohe Products
Today, modern sanitary and kitchen tapware, showers, accessories, washstands,
tubs and radiators consist of very different materials to comply with the needs of the
market with regard to design and functionality.
To avoid damage and reclamations, it is necessary to consider certain criteria when
cleaning.
With regard to caring for the Hansgrohe products, the
following must in principle be heeded:
• Only use cleaning material which is explicitly provided for this type of applica-
tion.
• Never use cleaning materials, which contain hydrochloric acid, formic acid,
chlorine pale lye or acetic acid, as they cause considerable damage.
• Phosphorus acidic cleaners are only conditionally applicable.
• Mixing cleaning agents is not permitted, generally.
• Never use cleaning materials or appliances with an abrasive effect, such as
unsuitable cleaning powders, sponge pads or micro fibre cloths.
• The instructions of the cleaning agent manufacturers have to be followed absolu-
tely.
• Cleaning has to be carried out with a specified cleaner dosage, contact time,
object-related and adapted to the needs.
• The building up of calcifications has to be removed by cleaning regulary.
• When using spray cleaners, spray the cleaning solution onto a soft cloth or
sponge, never directly onto the Hansgrohe products, as the atomised spray could
enter openings and gaps in the Hansgrohe products and cause damage.
• After cleaning rinse thoroughly with clean water to remove any cleaner residue.
• The use of steam cleaners is not permitted. The high temperatures can damage
the products.
Important
Residues of toiletries such as liquid soaps, shampoos and shower gels, hair dyes,
perfumes, aftershave and nail varnish can also cause damage.
Here too: Carefully rinse with water after use to remove residues.
Likewise, do not store any cleaning agents or chemicals under the products, for
example in a vanity unit, as the vapours may damage the products.
The damage of already damaged surfaces will deteriorate under the effect of the
cleansers.
Components with damaged surfaces must be exchanged,
otherwise there could be an injury danger.
Damage caused by improper treatment will not be covered by our guarantee.
QuickClean
The QuickClean cleaning function only needs a small manual rub over to remove
the lime scale from the spray channels.
Warranty
Hansgrohe guarantees to the consumer that this product is free of production faults.
If evertheless any defect is detected within 5 years from date of purchase, Hansgro-
he will remedy this defect free of charge. You will find the conditions and details of
this guarantee at www.hansgrohe-int.com/guarantee. Please contact your contrac-
ting party to claim your rights under this guarantee. This guarantee does not affect
the customer‘s rights under the respective national legislation.
汉斯格雅产品的清洁建议
现代的卫浴龙头、厨房龙头、花洒、配件、盥洗台、浴盆和加热器采用的
制造材料非常迥异,以适应产品外形设计和使用功能的市场需求。
为了避免产品损坏和由此引发的投诉及争议,必须在使用和清洁产品时遵
循有关规程。
在保养汉斯格雅产品时,原则上必须注意:
•
只能使用那些有明确注明是适用于本产品的清洁剂。
•
不允许使用含有盐酸、蚁酸、氯漂或醋酸的清洁剂,因为这些清洁剂会
给产品表面造成严重的损伤。
•
含磷酸的清洁剂必须在特定条件下使用。
•
不允许将两种以上清洁剂混合使用。
•
不允许使用具有研磨作用的清洁工具和设备,如不适合的清洁粉末、海
绵垫或超细麦克布。
•
必须严格遵守清洁剂生产厂商的使用说明。
•
严格遵守清洁剂的用量和作用时间,决不允许清洁剂的作用时间长于规
定值。
•
定期的清洁以预防水垢。
•
不允许将清洁剂直接喷射到汉斯格雅产品上,因为喷雾会进入汉斯格雅
产品的开口部分和缝隙中而造成损害。首先将清洁剂喷在软布上,再用
软布进行清洁。
•
清洁之后必须用足够的清水冲洗,以彻底去除残留的吸附物(清洁剂)
。
•
不允许使用蒸汽清洗机,高温会损害产品。
重要说明
肥皂,洗发水、沐浴液、染发剂、香水、刮胡水、指甲油的残留也会对产
品造成损伤。
此处:使用后要小心地用清水将剩余物冲洗干净。
同样在产品下方不得存放洗涤剂和化学药品,例如不可放在用于洗脸盆的
梳洗柜中否则挥发气体将损坏产品。
在已经损伤的表面继续使用清洁剂会给表面造成更大的损伤。
表面损坏的部件必须更换,否则会有受伤的危险。
不按规定进行清洁而造成的任何损坏不在本公司产品保修范围之内。
QuickClean
有了
QuickClean
,手工清洁功能,要去掉喷头上的水垢,只需简单地搓除
即可。
担保
Hansgrohe
向用户保证,该产品无制造 缺陷。如果自购买之日起五年内出
现缺 陷,
Hansgrohe
将免费排除。 保证条件和详 情见
www.hansgrohe-int.
com/guarantee
。 在提 出保修的权利时请联系您的合同方。本保证 不涉及
有关国家法律规定的消费权
QUICK
CLEAN
13
Reinigung
Summary of Contents for Raindance Select E 360 Showerpipe EcoSmart...
