3
English
Assembly
(see page 4)
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The drain valve must only be used as intended. It is
not allowed to attach other objects to the drain
valve, for example a semi-pedestal.
• If the instantaneous water heater causes problems
or if you wish to increase the water flow, the
EcoSmart
®
(flow limiter) located behind the aerator
can be removed.
Technical Data
This mixer series-produced with EcoSmart
®
(flow limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment
(see page 6)
To adjust the hot water limiter. Using a hot water limiter
in combination with a continuous flow water heater is
not recommended.
Dimensions
(see page 7)
Flow diagram
(see page 8)
with EcoSmart
®
without EcoSmart
®
Spare parts
(see page 9)
XXX = Colors
000 = Chrome Plated
140 = Brushed Bronze
340 = Brushed Black Chrome
670 = Matt Black
700 = Matt White
990 = Polished Gold-Optic
Special accessories
(order as an extra)
• special tool #58085000 (see page 4)
• Installation putty (see page 5)
Cleaning
(see page 10)
Operation
(see page 8)
• Hansgrohe recommends not to use as drinking water
the first half liter of water drawn in the morning or
after a prolonged period of non-use.
• After periods of prolonged non-use, but at least
every third day, the fittings must be opened with the
handle in hot and cold position to prevent stagnation
in the connecting lines. Let the water run until the
water temperature is constant.
Summary of Contents for Metropol 110 32507 7 Series
Page 4: ...4 58085000 max 7 Nm SW 9 mm SW 23 mm 4 Nm 3 Nm 1 2 1 2 3 4 5 6...
Page 5: ...5 50 Ncm 12 2 min 14 58085000 max 7 Nm 11 9 10 11 15 13 11 9 7 8...
Page 6: ...60 C 10 C 0 3 MPa 6 7 8 4 5 3 1 2 SW 3 mm 3 x SW 3 mm 5 Nm 36 C 38 C 43 C 60 C 55 C 50 C 6...
Page 10: ...10 QuickClean QuickClean Hansgrohe Hansgrohe www hansgrohe int com guarantee QUICK CLEAN...
