4
English
Assembly
(see page 34)
Safety Notes
Wear personal protective equipment (PPE) (safety shoes, gloves, etc.)
Children as well as adults with physical, mental and/or sensoric impairments
must not use this product without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from using this product.
Electrical connection
The current version of the applicable regulations from VDE, local authorities and
utility companies must be observed for electric installation work.
The installation and test work must be performed by an authorized electrician
under consideration of DIN VDE 0100 part 701 / IEC 60364-7-701.
The circuit must be protected via a ground fault protector (RCD / FI) with a
measured differential current of ≤ 30 mA.
The proper function of this protective device must be checked at regular
intervals.
The ambient temperature must not be higher than 50ºC.
Installation Instructions
• Prior to installation, inspect the product for transport damages. After it has been
installed, no transport or surface damage will be honoured.
• The plumbing codes applicable in the respective countries must be observed.
• During installation of the product by qualified trained personnel, make sure that
the entire fastening surface is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply the product and has no
weak points.
• Any work may only be carried out in a de-energized state.
• Only standardized materials may be used for the installation.
• All components must remain accessible.
• No easily inflammable material is allowed in the immediate vicinity.
• The installation location of the iBox Hub must be accessible at any time and
must lie outside areas 0 and 1.
• The iBox Hub offers different connection options, LAN and HDMI, jack or
Toslink for AUX. If a screen is connected to the iBox Hub, the connection must
be established by means of a “fiber optic HDMI cable” or “HDMI glass fiber
cable”.
• The "hansgrohe installer app" is a mandatory requirement for setting up the
iBox Hub. This app can be accessed here: https://www.hansgrohe.com/
smart-living/app
• Hansgrohe SE hereby declares that the RainButton wireless unit type complies
with Directive 2014/53/EU. The full text of the EU Declaration of Conformity
can be accessed on the following website: pro.hansgrohe.com
transformer
The power supply unit must be installed in a flush socket > Ø 60 mm (deep
version). This flush socket is connected with the installation area for the iBox
control via an empty conduit EN 20.
The voltage supply from the 12 V DC SELV must only be fed via the included
transformer type 30335810. The transformer must be installed safe from
outside contact outside the zones 0, 1 and 2 in a flush-type box to be provided
by the customer.
The mains voltage of 100 - 240 V AC 50 - 60 Hz must be supplied via a shutoff
device (switch) as well as a ground fault protector (RCD / FI) with a measured
differential current of ≤ 30 mA.
For power supply, only use the power supply unit comprised in the delivery.
A different or excessive use is considered non-intended. The user/operator bears
the sole risk. The intended use includes the adherence to the operating instructions
and the observance of the inspection and maintenance guidelines. The manufactur-
er/seller of this product does not assume any responsibility for injuries or damage
that may be caused by improper installation or non-intended use.
Technical Data
Type plate:
see page 36
Interfaces
LAN RJ45
WLAN 2.4 GHz, WPA2 encoding
Bluetooth 4.1
USB 2.0 type A (debug interface)
HDMI type A
AUX (jack 3.5 mm / miniTOSLink))
CAN 1 (interface to the iBox Control)
CAN 2 (for future extensions)
transformer 30335810
(Technical Data see typeplate)
Input (IN):
100 - 240 V / 50 - 60 Hz
Output (OUT):
12 V DC SELV / 2,5 A
Dimensions:
see page 35
weight:
92 g
LED display
• Green: System in operation
• Dark blue flashing: Search button active
• Light blue: Access point open
• Yellow: No MQTT connection
• White: Firmware update running
• Red: Fault
Repair
Only by Hansgrohe trained personnel or persons or companies appointed by
Hansgrohe.
Disposal of waste batteries and old Electrical &
Electronic Equipment
(applicable in the European Union
and other European countries with separate collection
systems).
This symbol on the battery, the product or the packaging indicates that the battery
or the product shall not be treated as household waste. By ensuring the battery or
product are disposed of correctly, you will help prevent potentially negative
consequences for the environment and human health. The recycling of the
materials will help to conserve natural resources. To ensure that the battery or
product will be treated properly, hand over the product at end-of-life to the applica-
ble collection point for the recycling of batteries, electrical and electronic
equipment. For more detailed information about recycling of this product or
battery, please contact your local Civic Office, your household waste disposal
service or the shop where you purchased the product.
Symbol description
Dimensions
(see page 35)
Installation example
(see page 32)
Flow diagram
(see page 33)
Spare parts
(see page 36)
i
