Hans Grohe Axor Montreux 16513 Series, Instructions For Use/Assembly Instructions

Page: 4 / 40

SafetyNotes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pres-
sures.
InstallationInstructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart ®
(flow limiter) located behind the aerator can be
removed.
TechnicalData
Thismixerseries-producedwithEcoSmart
®
(flow
limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
The aerator is not equal to DIN EN 246
The product is exclusively designed for drinking water!
Hansgrohe mixers can be used together with hydrauli-
cally and thermically controlled continuous flow heaters
if the flow pressure is at least 0,15 MPa.
English
Cleaning
see enclosed brochure.
Operation (see page 40)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Spareparts (see page 37)
XXX = Colors
000 = chrome plated
820 = brushed nickel
Dimensions (see page 36)
Do not use silicone containing acetic acid!
Specialaccessories
(order as an
extra)
special tool #58085000
Installation putty
Installationexample
(see page
31)
Hose kit #38959000
Symboldescription
Flowdiagram
(see page 36)

with EcoSmart ®

without EcoSmart ®
Testcertificate
(see page 40)
Assemblyseepage32
4
i