0 4
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective coun-
tries must be oberserved.
⁄ The drain valve must only be used as intended. It is not
allowed to attach other objects to the drain valve, for
example a semi-pedestal.
⁄ If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
T E C H N I C A L D A T A
This mixer series-produced with EcoSmart
®
(flow limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C ⁄ 4 min
The product is exclusively designed for drinking water!
C L E A N I N G (see page 37 and enclosed
brochure)
S P A R E P A R T S (see page 38)
A S S E M B L Y (see page 31)
R A T E O F F L O W
(see page 36)
with EcoSmart
®
without EcoSmart
®
D I M E N S I O N S (see page 36)
S P E C I A L A C C E S S O R I E S (order as an
extra)
special tool #58085000
Installation putty
O P E R A T I O N (see page 35)
Hansgrohe recommends not to use as drinking
water the first half liter of water drawn in the
morning or after a prolonged period of non-use.
Do not use silicone containing acetic acid!
S Y M B O L D E S C R I P T I O N
EN
T E S T C E R T I F I C A T E (see page 39)
Summary of Contents for AXOR Citterio E 36108000
