Hans Grohe AXOR Citterio 39850 Series, Instructions For Use/Assembly Instructions, Page: 8 / 44

0 4
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pressures.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective coun-
tries must be observed.
T E C H N I C A L D A T A
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C ⁄ 4 min
⁄ The product is exclusively designed for drinking water!
⁄ Hansgrohe mixers can be used together with hydrauli-
cally and thermically controlled continuous flow heaters
if the flow pressure is at least 0,15 MPa.
F L O W D I A G R A M
(see page 36)
A S S E M B L Y (see page 31)
A D J U S T M E N T
(see page 35)
To adjust the hot water limiter. Using a hot water
limiter in combination with a continuous flow
water heater is not recommended.
O P E R A T I O N
(see page 37)
Hansgrohe recommends not to use as drinking
water the first half liter of water drawn in the
morning or after a prolonged period of non-use.
C L E A N I N G
see enclosed brochure
S P A R E P A R T S
(see page 38)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Do not use silicone containing acetic acid!
S Y M B O L D E S C R I P T I O N
D I M E N S I O N S
(see page 36)
EN
T E S T C E R T I F I C A T E
(see page 39)