Hans Grohe Axor 10452180, Assembly Instructions Manual

Page: 4 / 60

SafetyNotes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.
InstallationInstructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The basic set must be sealed in by the customer. (see
page 33)
• The plumbing codes applicable in the respective
countries must be observed.
TechnicalData
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!
English
Spareparts
(see page 59)
Dimensions (see page 31)
Do not use silicone containing acetic acid!
Symboldescription
Testcertificate
(see page 31)
AssemblyBath-showermixer/basinmixersee
page32
AssemblyBathSpoutseepage34
AssemblyBath-showermixerseepage36
Specialaccessories
(order as an
extra)
sealing foil #96441000
Freestanding tub with outside covering.
*
< 30 min. = extension 60 mm (article
number #97686000)
Finishset
(see page 38)
4