background image

Hanover Outdoor Furniture 

6/1/2015 (b) 

 

 

 
 
 

 

 

 

To expedite any future warranty claims, please retain the Instruction Sheet, Warranty 
Card and receipt for future use. 

 

Care and Maintenance 

Store furniture in an upright position. Be careful to never allow water to build up in frames as this will 
cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and 
water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a 
liquid  wax  for  maximum  protection  against  UV  rays  and/or  salty,  damp  air.  If  your  set  includes 
cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water 
with a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in 
shrinkage  or  damage).  After  cleaning  cushions  tip  on  end  and  allow  to  drip  dry.  (Never  use  a 
commercial  or  home dryer  to  tumble  dry  fabric  goods). Do not  use  bleach  or  solvents to  clean  any 
product! This will void the warranty. 

 

For additional on‐line support on assembly, troubleshooting and care & maintenance of your outdoor 
furniture, please visit our website at: www.hanover‐products.com

 

 

IMPORTANT 

If you have any problems with this product (missing or damaged parts, assembly issues, etc.), 

PLEASE DO NOT RETURN TO THE RETAILER/STORE 

from where you purchased the product. 

Please call our Toll‐Free Customer Service Hotline at: 

1-877-397-5144 

Between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday 

Or visit our website at: 

www.hanover‐products.com 

Summary of Contents for BRIGDN5PCBR











Reviews: