11
English
5. If prompted, enter the password to connect to the AP.
6.Tap Connect
.
2.3 Connecting PC and Data Transmission
Use the supplied USB cable, connect the device to the PC to transfer data or power up the device.
2.4 Using Micro SD Card
After connecting the device to a PC, you will find two removable disks, the front one is the
built-in-memory disk, the other one is the micro SD card disk. If there is no card plugged in, the
second disk cannot be opened. The device supports up to 32GB micro SD card expansion.
Plug-in
: insert the memory card with the side with prints facing to the front of the device. Push the
memory card into the card slot until it is firmly seated. Now the device can access the data and play
the files stored on the card.
Plug-out
: push the micro SD card slightly inward to release it from the slot. Then gently pull it out of
the card slot.
NOTE:
•
The password entry is required only when connecting to the AP for the first time.
• To make the Wi-Fi password is visible while ty
ping it, select the “Show password” checkbox.
NOTE:
• Some public places offer free wireless internet access
. This means no password is required to establish
the connection.
• For secured networks, you may need to enter several pa
rameters to complete the settings. If you are not
sure about the parameters, please contact your local Internet Service Provider (ISP).
• This tablet PC keeps track and recognizes Wi-Fi net
works that have been connect
ed before. Once Wi-Fi is
turned on and a known connection is detected, the device automatically connects to that network.
NOTE:
USB charging only supports 500mA. If the battery power is lower than 4%, the device cannot be turned
on.
Summary of Contents for HANNSpad SN12TP1
Page 1: ...SN12TP1 HSG1360...
