PLL ALARM CLOCK RADIO With BLUETOOTH
And USB PORT FOR CHARGING
Model : HX-106CR
(Bluetooth Pairing code : HX-106CR HANNLOMAX)
INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
2.
Do not use this apparatus near water.
3.
Clean only with dry cloth.
4.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
6.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
7.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
8.
Only use attachments/accessories specified by the manufacturer.
9.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
10.
Unplug this apparatus during lightning storms or when unused for long periods of time.
11.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
12.
Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
13.
Alternate Warnings – This product is equipped with a three-wire ground-type plug, a plug having a third (grounding) pin.
This plug will only into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type
plug.
14.
Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
15.
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily
operable.
16.
回
: CLASS II apparatus with double insulation, and no protective earth provided.
17.
Caution Marking and rating plate was located at bottom enclosure of the apparatus.
18.
WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
-1-
19.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on apparatus.
20.
The mains plug is used as disconnect device. The mains plug of apparatus should not be obstructed OR should be
easily accessed during intended use. To be completely disconnect the power input, the mains plug or apparatus shall
be disconnected from the mains.
21.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
22.
Excessive sound pressure from earphones and headphone can cause hearing loss.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
SPECIFICATIONS
Frequency Range:
FM 87.5 – 108 MHz
Power Supply:
AC 100-240V ~ 60/50 Hz
Rated Output
DC5V 1.5A
Back-Up Battery:
One piece CR2032
Specifications are subject to change without prior notice.
CONNECTING THE UNIT TO POWER
Plug one end of the AC adaptor into the DC power Input, and then
plug the other end into AC wall outlet. Before switching on the unit,
make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate.
BACKUP BATTERY
One piece of CR2032 batteries is built into the battery compartment.
In case of power failure or interrupted AC power, the current time and
alarm time settings, the stored radio stations are preserved in the
memory of the unit by means of battery back-up function.
VOLUME CONTROL
1, Rotate the
Volume Control
Anti clockwise to decrease the volume.
2. Rotate the
Volume Control
clockwise to increase the volume.
DIMMER FUNCTION
Press
DIMMER
button adjust the brightness of the display.
CLOCK MODE
Press and hold
STANDBY/MODE/AL RESET
button
at anytime to enter
CLOCK
mode
-2-
