manualshive.com logo in svg

Hanna Instruments HI97769, Instruction Manual, Page: 5 / 32

Share
Download
Hanna Instruments HI97769 Instruction Manual Download Page 5

5

SAFETY MEASURES

2.  SAFETY MEASURES

• The chemicals contained in the reagent kits may be hazardous if 

improperly handled.

• Read the Safety Data Sheets (SDS) before performing tests.
• Safety equipment: Wear suitable eye protection and clothing when 

required, and follow instructions carefully.

• Reagent spills: If a reagent spill occurs, wipe up immediately and rinse 

with plenty of water. If reagent contacts skin, rinse the affected area 
thoroughly with water. Avoid breathing released vapors.

• Waste disposal: For proper disposal of reagent kits and reacted samples, 

contact a licensed waste disposal provider.

3.  ABBREVIATIONS 

mg/L 

milligrams per liter (ppm)

mL milliliter
°C 

degree Celsius 

°F 

degree Fahrenheit

EPA 

US Environmental Protection Agency

GLP 

Good Laboratory Practice

HDPE 

High Density Polyethylene

LED 

Light Emitting Diode

NIST 

National Institute of Standards and Technology

ABBREVIA

TIONS

Summary of Contents for HI97769

































Reviews:

No comments