manualshive.com logo in svg

Hanna Instruments HI97769, Instruction Manual, Page: 20 / 32

Share
Download
Hanna Instruments HI97769 Instruction Manual Download Page 20

20

METHOD PROCEDURE

8.  METHOD PROCEDURE

REQUIRED REAGENTS
Code Description 

Quantity

HI95769A-0

 

Anionic Surfactants Reagent A  4 drops

HI95769B-0

 

Anionic Surfactants Reagent B  2 drops

- 

Chloroform Reagent 

10 mL

DEIONIZED120

  Deionized Water 

15 mL

REAGENT SETS

HI95769-01

 

Anionic Surfactants Reagent - 40 tests

For other accessories see ACCESSORIES section.

MEASUREMENT PROCEDURE

Note: 

If tutorial mode is disabled follow the measurement procedure below. If the 

tutorial mode is enabled, press 

Measure

 and follow the messages on the screen.

• Fill the graduated glass vial with 25 mL of sample.

Note: 

For improved accuracy the use of class A 

laboratory pipette is recommended.

• Add 2 drops of 

HI95769A-0

 Anionic Surfactants 

Reagent A and 2 drops of 

HI95769B-0

 Anionic 

Surfactants Reagent B.

• Replace the cap and invert to mix, the solution will 

turn blue.

• Add 10 mL of Chloroform.

Note: 

Chloroform is more dense than water and 

will sink to the bottom of the graduated glass vial.

25 mL

×2

×2

10 mL

Summary of Contents for HI97769

































Reviews:

No comments