![background image](http://html1.mh-extra.com/html/hanna-instruments/hi-9063/hi-9063_instruction-manual_3728447001.webp)
w w w . h a n n a i n s t . c o m
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.
WARRANTY
Dear Customer,
Thank you for choosing a Hanna product. This manual will
provide you with the necessary information for correct opera-
tion. Please read it carefully before using the meter. If you
need additional technical information, do not hesitate to e-
mail us at
.
These instruments are in compliance with the direc-
tives.
PRELIMINARY EXAMINATION
GENERAL DESCRIPTION
FUNCTIONAL DESCRIPTION
This Instrument is in
Compliance with CE
Directives
SPECIFICATIONS
Instruction Manual
HI 9063
Portable Waterproof
Microprocessor
K-Type Thermocouple
Thermometer
Remove the instrument from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable damage,
notify your Dealer or the nearest Hanna Office.
Note: Save all packing materials until you are sure that the
instrument functions correctly. Any defective item must
be returned in the original packaging together with
the supplied accessories.
Range (*)
Resolution
Accuracy
(@20°C/68°F)
Typical EMC
Deviation
Display
Battery Type
Life
Probe
Environment
Dimensions
Weight
1. Temperature probe connector
2. Liquid Crystal Display
3. ON/OFF Key
4. Measuring unit selection key
5. HOLD measurement key
6. HI/LO values reset key
HI 9063
is a waterproof, microprocessor-based, K-type ther-
mocouple thermometer, which provides very accurate
measurements in a wide range of temperatures.
The meter is also provided with low battery detection and
BEPS (Battery Error Preventing System), which turns the
unit off when the batteries are discharged avoiding errone-
ous readings caused by low battery level.
HI 9063
features include autoranging capability, dual-level
LCD for simultaneously displaying of maximum and minimum
measured temperatures, °C/°F selection button and hold
function.
Each meter is supplied complete with 4 x 1.5V AA batteries
and instruction manual.
1. Current temperature value
2. HOLD indicator
3. Low Battery indicator
4. Minimum temperature value
5. Maximum temperature value
6. K-type probe indicator
7. Measuring scale, °C or °F
FACTORY RECALIBRATION
All Hanna Instruments thermometers have been accurately
pre-calibrated at the factory. It is generally recommended to
have all thermometers recalibrated at least once a year.
For an accurate annual recalibration, contact your nearest
Hanna Service Center.
All Hanna Instruments
meters are warranted for two years
against
defects in workmanship and materials when used for their intended pur-
pose and maintained according to instructions.
Sensors and
probes are
warranted for a period of six months
.
This warranty is limited to repair or replacement free of charge.
Damages due to accidents, misuse, tampering or lack of prescribed main-
tenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure.
First obtain a Returned Goods Authorization number from the Customer
Service department, then return the instrument with the Authorization #
included along with shipment costs prepaid. If the repair is not covered by
the warranty, you will be notified of the charges.
When shipping any instrument, make sure it is properly packaged for
complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner, Hanna Instruments
Inc., Woonsocket, Rhode Island, 02895 , USA.
(*)
Range may be limited by probe.
-50.0 to 199.9°C / 200 to 1350°C
-58.0 to 399.9°F / 400 to 2462°F
0.1°C (up to 199.9°C) / 1°C (outside)
0.1°F (up to 399.9°F) / 1°F (outside)
±0.2% F.S. excluding probe error
±3°C (with HI 766 probes)
±6°F (with HI 766 probes)
Dual-line LCD
4 x 1.5V AA (IEC LR6)
approx. 2000 hours of continuous use
K-type thermocouple (see “Accessories”)
-10 to 50ºC (14 to 122ºF); RH 100%
196 x 80 x 60 mm (7.7x3.1x2.4")
425 g (15 oz.) meter only