w w w . h a n n a i n s t . c o m
HI 7632-00
is an EC/TDS probe with built-in
NTC sensor which provides temperature compen-
sated conductivity measurements.
It can be used with the following Hanna meters:
BL 983317
: 0.00 to 10.00 mS/cm
BL 983318
: 0.00 to 10.00 ppt
BL 983327
: 0.00 to 10.00 mS/cm
HI 7632-00 Conductivity Probe
WARRANTY:
HI 7632-00 probe is warranted for a period of one
year.
This warranty is limited to repair or replacement free
of charge.
Damages due to accident, misuse, tampering or lack of
prescribed maintenance are not covered.
If service is required, contact the dealer from whom you
purchased the instrument. If under warranty, report the
model number, date of purchase, serial number and the
nature of the failure. If the repair is not covered by the
warranty, you will be notified of the charges incurred. If
the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Number from the
Customer Service department and then send it with ship-
ment costs prepaid. If the repair is not covered by the
warranty, you will be notified of the charge for repair or
replacement. When shipping any instrument, make sure it
is properly packaged for complete protection.
