SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Instruction Manual
www.hannainst.com
Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instruction sheet carefully before using the
test kit. It will provide you with the necessary information
for correct use of the kit. If you need additional information,
do not hesitate to e-mail us at [email protected].
Remove the chemical test kit from the packing material and
examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable dam-
age, notify your Dealer or the nearest Hanna office
immediately.
Each kit is supplied with:
• HI 93718-0 Reagent, packets (100 pcs);
• 1 color comparator cube;
• 1 plastic pipette (3 mL).
Note:
Any damaged or defective item must be returned in
its original packing materials.
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
HI 3879
Iodine
Test Kit
ISTR3879 10/00 PRINTED IN ITALY
Range
0 to 5 mg/L (ppm)
Smallest Increment
1 ppm
Analysis Method
Colorimetric
Sample Size
5 mL
Number of Tests
100
Case Dimensions
230x60x68 mm (9.0x2.4x2.7")
Shipping Weight
143 g (5.0 oz.)
SIGNIFICANCE AND USE
SIGNIFICANCE AND USE
SIGNIFICANCE AND USE
SIGNIFICANCE AND USE
SIGNIFICANCE AND USE
The disinfectant properties of iodine have led to its use as
an alternative to chlorine and bromine.
However, its toxic and corrosive properties and the difficulties
of dissolving it in water has limited a more wide-spread
application. One of its most common application is in
poultry industry process water.
Note:
mg/L is equivalent to ppm (parts per million).
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
The chemicals contained in this kit may be hazardous if
improperly handled. Read the relevant Health and Safety
Data Sheet before performing this test.
HEALTH AND SAFETY
HEALTH AND SAFETY
HEALTH AND SAFETY
HEALTH AND SAFETY
HEALTH AND SAFETY
REFERENCES
REFERENCES
REFERENCES
REFERENCES
REFERENCES
Adaptation of the
Standard Methods for the Examination
of Water and Wastewater
, 18th edition, DPD method.
READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
• Fill the color comparator cube with
5 mL of sample (up to the mark).
• Add 1 packet of HI 93718-0 reagent, replace the cap
and shake well.
• Wait for 2 minutes to allow color
to develop.
• Determine which color matches the solution in the vessel
and record the result as mg/L (or ppm) of Iodine.
Note:
It is better to match the color with a white sheet
placed at about 10 cm (4") behind the comparator.
5 mL
10 cm
The reaction between iodine and the reagent causes a
reddish tint in the sample. The amount of color developed is
proportional to the concentration of iodine present in the
aqueous sample.
CHEMICAL REACTION
CHEMICAL REACTION
CHEMICAL REACTION
CHEMICAL REACTION
CHEMICAL REACTION
