manualshive.com logo in svg

Hanna Instruments HI 2550, Instruction Manual, Page: 63 / 64

Share
Download
Hanna Instruments HI 2550 Instruction Manual Download Page 63

63

RECOMMENDATIONS FOR USERS

Before using this product, make sure it is entirely suitable for your specific 

application and for the environment in which it is used. Any variation 

introduced by the user to the supplied equipment may degrade the meter’s 

performance. For yours and the meter’s safety do not use or store the 

meter in hazardous environments.

Hanna Instruments reserves the right to modify the design, 

construction or appearance of its products without advance notice.

HI2550 

is guaranteed for two years against defects in workmanship and 

materials when used for their intended purpose and maintained according 

to instructions. Electrodes and probes are guaranteed for six months.

 

This 

warranty is limited to repair or replacement free of charge. Damage due 

to accidents, misuse, tampering or lack of prescribed maintenance is not 

covered. If service is required, contact your local Hanna Instruments Office. 
If under warranty, report the model number, date of purchase, serial 

number and the nature of the problem. If the repair is not covered by the 

warranty, you will be notified of the charges incurred. If the instrument 

is to be returned to Hanna Instruments, first obtain a Returned Goods 

Authorization number from the Technical Service department and then 

send it with shipping costs prepaid. When shipping any instrument, make 

sure it is properly packed for complete protection.

WARRANTY

CERTIFICATION

All Hanna Instruments conform to the 

CE European Directives.

Disposal of Electrical & Electronic Equipment.

 The 

product should not be treated as household waste. 

Instead hand it over to the appropriate collection point 

for the recycling of electrical and electronic equipment 

which will conserve natural resources.

Disposal of waste batteries.

 This product contains batteries, 

do not dispose of them with other household waste. Hand 

them over to the appropriate collection point for recycling.

Ensuring proper product and battery disposal prevents potential 

negative consequences for the environment and human health. For 

more information, contact your city, your local household waste disposal 

service, the place of purchase or go to www.hannainst.com.

Summary of Contents for HI 2550

































































Reviews:

No comments