manualshive.com logo in svg

Hanna Instruments HI 2550, Instruction Manual, Page: 35 / 64

Share
Download
Hanna Instruments HI 2550 Instruction Manual Download Page 35

35

SETUP

Setup mode allows viewing and modifying the following instrument 
parameters.
In according with the selected range, SETUP menu allows the possibility to 
view and /or change specific range parameters and common parameters 
(for all the ranges).
The common parameters are:
•  Log interval
•   Current Time (hour & minute)
•   Current Date (year, month & day)
•   Beep Status
•   Instrument Id
•   Temperature Unit
The specific parameters are:

In pH range

•  Expired Calibration Alarm
•  First Custom Buffer
•  Second Custom Buffer
•  One‑point Calibration Behavior
•  pH Resolution

In EC/TDS/NaCl range

•  Cell Constant
•  TDS Factor
•  Temperature Compensation Coefficient
•  Reference Temperature
To enter SETUP mode press 

SETUP

 while the instrument is in mea‑

surement mode.
Select a parameter with the 

ARROW

 keys.

Press 

CAL

 to change a parameter value. The selected parameter

 

will 

start blinking.
Press 

RANGE

 to toggle between displayed parameters.

Press the 

ARROW 

keys to increase or decrease the displayed value.

Press 

CFM

 to save the modified value or 

CAL

 to escape without saving.

Summary of Contents for HI 2550

































































Reviews:

No comments