CP4000 User Manual
Rev.1.3
1
Statement
This manual content may be altered without permission, and Xiamen Hanin Electronic Technology Co.,
Ltd. reserves the rights to make changes without notice in technology, spare parts, hardware and
software of the products. If more information is needed about the products, please contact Xiamen
Hanin Electronic Technology Co.,Ltd.. Without any written permission from the company, any section
of this manual is prohibited to be copied or transferred in any form.
Safety Precautions
To use this product in safety, please follow the precautions given below.
WARNING
If you notice smoke, a strange smell, or a strange sound, turn off the power immediately, and
remove the USB cable and/or battery pack. Then contact the dealer.
If any foreign material (metal scraps, water, or other fluid) enters the printer, immediately turn
off the printer and remove the USB cable and/or battery pack. Then, contact your dealer for
advice. Continued use of the printer could result in a fire.
Never attempt to repair the printer yourself. Also do not disassemble or modify the product.
Doing so could lead to injury, fire, or electric shock.
Do not touch the tear bar.
There is a tear bar inside the paper outlet slot. Neither put your hand in the paper outlet slot
while printing is in progress, or put your hand into the outlet even when printing is not in
progress.
The printer cover can be opened when replacing the paper. However, since the tear bar is on
the inside of the printer cover, be careful not to place your face or hands too close to the tear
bar.
During and immediately after printing, the area around the thermal head is very hot.Do not touch
it, as you could be burned.
If any battery fluid gets on your skin or clothing, immediately wash the affected area with fresh
water. Otherwise, skin damage may result.
The battery pack may be hot immediately after the product has been used.
