CP4000 User Manual
Rev.1.3
14
5.4 Selecting and Printing Images Setting (Printed from Memory Card/USB
Flash Drive)
Select images from a memory card/USB flash drive and print them as follows.
1. Insert the memory card into the slot. (The figure on the
left just takes memory card for example)
•
Insert the memory card facing as shown until it clicks into
place.
•
To remove the card, push it in until it clicks, and then
slowly release it.
•
The [Select&Print] image selection screen is displayed.
•
The printed image format is JPG or BMP, and the
supported maximum capacity is 1000w pixels.
2. Choose an image.
Press< > < > buttons to choose an image to print.
Press <
> <
>buttons to add or delete current
selected images.
<
> indicates number of printing images
<
> cancel the current selected image
<
> select the current selected image
<
> selected times of the current image
•
Press <MENU> button
，
choose the items as needed.
•
Press <OK> button. The [Preview] screen is displayed. To
adjust the settings displayed, press the <MENU> button
and change the settings on the [Print Settings] screen.
