42
Figure 4-21
At this point, the UAV began to operate automatically.
4.3.3
A
、
B point operation mode
4.3.3.1 Operation method
Figure 4-22
1.
Record A point
Hover in GPS mode, turn the AB stick to second gear. After completing the recording, the LED lights
flash yellow for 2 seconds.
2.
Record B point
Hover in GPS mode and turn the AB stick to the third gear. After completing the recording,
the LED flashes green for 2 seconds.
3.
AB execution
Turn on AB execution function.
4. Choose direction
Operate the roll bar to select the direction. Move the left roll rocker to the left and the right roll rocker to
the right. The premise of this step is to clear the previously recorded AB point, otherwise the aircraft will fly
at the last AB point and skip this step.
5. Interrupt AB operation
Summary of Contents for 3WD4-QF-10B
